Hpled II C6 colour (rgbacl) NEW

Give new life to your  Source Four  and change it into an efficient colour led profile spotlight

Red, Green, Blue, Amber, Cyan, Lime

• Easy maintenance (remove the glass spotlight and insert the unit by screwing in the three screws. Required time: 5/7 minutes )
• Light quality (consistent light, high colour rendering CRI 93-98, constant colour temperature, luminous flux equivalent to a 750W halogen lamp, flicker free, no adjustment required, sharp and focused outlines without aberrations, compatible with ETC optics)
• CCT  Whites temperature control from 2300 ° K to 10,000 ° K, minimum CRI from 93 to 98 depending on the selected white. Halogen lamp emulation function
• Consumption – electrical connection (low consumption, maximum power consumption 175W, electrical connection by means of neutrik connectors with the possibility of powering various projectors on the same line)
• Dimming (Power supply directly connected to the network 110/240 V~, dimming control through the 8 or 16 bits DMX control, adjustment of the reaction times, quick reaction, dimming curves, always with a uniform and smooth operation, without jumps even at the lower light level, RDM control)
• Heat (drastic temperature reduction of the projector unit resulting in savings for air-conditioning; possibility of using gobos printed on acetate sheets)
• Maintenance (savings for lamps replacement, lamp average life 300/500 hours, depending on the model, Led life 30,000 hours, as estimated by the manufacturer)
• Noise (efficient and silent cooling, with possibility to adjust the fan speed, 12dB /28db)
• Protections (inner active control system which adjusts the operation of the unit by controlling the temperature thus protecting it in any situation)
• Versions (a complete range with a variety of versions in order to meet all needs, available with 3000°k, 4000°k, 5600°k white light, white variable from 3000° to 5700°k, coloured RGBWA, red, green, blue, white, amber, coloured RGBACL, Red, Green, Blue, Amber, Cyan, Lime
• Cheap (cost-effective PROFESSIONAL solution which allows to recycle the existing frames using the same fly cases)
• Made in Italy (made and assembled in Italy using reliable and high quality components)

Dimensions:

Technical Specifications
Power Supply: 100-240V ~ 50/60Hz auto-setting (single-phase)
Maximum power consumption: 175W		Minimum room temperature: -10°C
Stand-by power consumption: 3W		Maximum room temperature: 35°C
Available LED colour RGBACL(Red 1400 lm, green 1500 lm, blue 600 lm, amber 2300 lm, cyan 1400 lm, lime 3600 lm)
Led emission: 10800 lm total (see manufacturer’s specifications)		LED life 30.000 Hrs (see manufacturer’s specifications)
CCT 2300°k to 10.000°k		CRI from 93 to 98 depending on the selected white
Emulation of 3200 ° k halogen lamp during the dimming phase
7 operating modes, 16 bit dimming, rgb, HSI
Protection grade:IP20 (HOUSE HPLED in original ETC S4 only)		Working position: any
Data Protocols: DMX 512 and/or RDM ready		User's interface: 4-digit display and 4 keys
Power connectors: IN - OUT power-con Neutrik connectors		Data connectors: IN - OUT Neutrik XRL 5
Control of LED frequency: selection of LED frequency refresh		Fan control: fan speed adjustments (12 dB - 28 dB)
Dimming curves control: selection of four dimming curves control (quad, quad 2,scur S, line)
Possibility to operate without Dmx signal, 4 automatic programmable programs; manual selection of 30 color presets, 10 white presets;
Net weight: 2,49Kg	Packed weight: 3,3Kg	Packaging volume: 0,012m³
Compliant to: